Home > PLUMBING > KITCHEN & BATH > DRAIN & SUPPLY
Choose a sub category:
SUPPLY LINES SUPPLYADAPTERS & CONNECTORS ICEMAKER SUPPLY LINES
TUBULAR DRAIN - PLASTIC TUBULAR DRAIN - METAL FLOOR DRAINS AND TRAPS
POP-UP ASSEMBLY / PARTS
Sort By:
1 2 3 ... 11
TAILPIECE FLANGE 1-1/2ODX4 WHT Plumb Pak PP20552 Extension Tube Plumb Pak PP20999 Drain Pipe Adapter
Fits slip joint or direct connect tubes. Includes tailpiece with two nuts and washers. Plumb Pak Extension Tube, 1-1/2 in Dia X 6 in Length, Slip Joint, PVC, White Plumb Pak Drain Pipe Adapter, 1-1/2 in Nominal, Solvent Weld X Compression End, Plastic, White
Plumb Pak PP20944 Extension Tube Plumb Pak PP20554 Sink Drain Coupling TAILPIECE FLANGE 1-1/2ODX6 WHT
Plumb Pak Extension Tube, 1-1/4 in Dia X 6 in Length, Slip Joint, PVC, White With 1-1/2" x 1-1/4" reducing washers. Fits slip joint or direct connect tubes. Includes tailpiece with two nuts and washers.
ROD CLIP POP-UP BATHROOM      Plumb Pak PP205512 Extension Tube Plumb Pak PP20668 Master End Outlet Tee and Tailpiece With Baffle
Metal construction. Includes one small hole clevis clip and one large clevis clip. Fits most sinks. Plumb Pak Extension Tube, 1-1/2 in Dia X 12 in Length, Slip Joint, Plastic, White Plumb Pak Master End Outlet Tee and Tailpiece, 1-1/2 in Nominal, Slip/Direct End, Plastic, White
TUBE EXTEN SLIP 1-1/2X6IN WHT Plumb Pak PP20664 Master Dishwasher Tailpiece TEE CENTER OUTLET 1-1/2IN WHT
For kitchen and bathroom sink drains. Connects to either plastic or metal inlets. For use with hose or clamp. Fits slip joint tubes. Includes center outlet with two nuts and washers. 1-1/2" diameter.
Plumb Pak PP20945 Extension Tube TRAP ADAPTER 1-1/2IN WHITE    Oatey 43560 Snap-In Drain
Plumb Pak Extension Tube, 1-1/4 in Dia X 12 in Length, Slip Joint, PVC, White Fits slip joint tubes. Includes trap adapter with on nut and washer. 1-1/2" diameter. Designed for drainage in areas where waterproofing membrane is not required.  Plastic Snap-In Drain can be solvent welded or inserted into Sch. 40 DWV pipe.  One piece design does not allow for removal of the cover.
Plumb Pak PP20905 Sink Tailpiece Oatey 42757 Condensate P-Trap P-TRAP SLIP JOINT 1-1/2IN WHT
Plumb Pak Sink Tailpiece, 1-1/2 in Dia X 6 in Length, Flanged, PVC, White One-piece design. Made from 3/4" PVC Schedule 40 DWV pipe. For kitchen and bathroom sink drains. Includes P-trap with two nuts.
TAILPIECE FLANG 1-1/2ODX12 WHT Oatey 42758 Condensate Running Trap Worldwide Sourcing DWC-100 Dishwasher Connector
Fits slip joint or direct connect tubes. Includes tailpiece with two nuts and washers. One-piece design. Made from 3/4" PVC Schedule 40 DWV pipe Connects dishwasher drain hose to sink drain or to a garbage disposal. Made of flexible PVC.
Plumb Pak PP20558 Reducer Coupling TUBE ELBOW 1-1/2IN 90DEG WHT  Plumb Pak PP20946 J-Bend
1-1/2" slip joint x 1-1/4" solvent weld. 90 degree. Provides a liquid seal between the home and sewer gasses. Includes elbow tube with two nuts and washers. 1-1/2" OD. For P or S traps.
Oatey 42021 Replacement Round Snap-Tite Strainer WALL BEND PLASTIC 1-1/4X8 WHT J-BEND TRAP SLIP 1-1/2IN WHIT
6-3/4" white plastic replacement strainer. Screws included.Carded. For use in tubular sink drain applications. For kitchen and bathroom sink drains. 1-1/2"  or 1-1/4" inlet.
Plumb Pak PP20555 Sink Drain Pipe Elbow With Reducing Washer TUBE EXTEN SLIP 1-1/2X12IN WHT Plumb Pak PP20661 J-Bend
1-1/2" x 1-1/2" with 1-1/2" x 1-1/4" reducing washer. For kitchen and bathroom sink drains. Connects to either plastic or metal inlets. For P or S traps.
   
 
1 2 3 ... 11